Product Overview
The AIRLIFT LoadLifter 5000 Pro Series Air Spring Kit, part number 77354, is engineered to help commercial, fleet, towing, and work-truck customers maintain a more controlled and level ride when carrying heavy loads or towing. The system uses adjustable air springs installed between the vehicle frame and rear suspension to support load capacity and help reduce rear-end squat.
Designed for demanding truck applications, the LoadLifter 5000 Pro Series provides up to 7,500 lb of load-leveling capacity when properly inflated. Air pressure can be adjusted to match changing payload and trailer tongue-weight requirements, helping operators maintain improved handling, braking confidence, and headlight alignment.
Key Features
- LoadLifter 5000 Pro Series rear air spring suspension kit.
- Provides up to 7,500 lb of load-leveling capacity.
- Adjustable air pressure allows support to be tailored for varying loads.
- Helps level vehicles affected by heavy payloads or trailer tongue weight.
- Heavy-duty air spring design supports demanding towing and hauling applications.
- Designed to work with the vehicles existing rear suspension.
- Manual inflation valves allow independent air-pressure adjustment.
Benefits
- Helps reduce rear suspension sag while hauling cargo or towing trailers.
- Supports a more level stance for improved visibility and headlight aim.
- Helps improve overall towing stability and vehicle control.
- Can help reduce suspension bottoming under heavy loads.
- Allows operators to adjust support based on changing payload requirements.
- Ideal for fleets and work-truck operators seeking added load-management capability without replacing the factory suspension.
Common Applications
- Fifth-wheel and travel trailer towing.
- Heavy trailer tongue-weight management.
- Contractor and service-body trucks carrying tools and equipment.
- Commercial pickups used for material transport.
- Truck campers, slide-in campers, and cargo-heavy pickup applications.
- Fleet vehicles requiring adjustable rear load support.
Product Compatibility
This kit is designed for the following heavy-duty pickup truck applications:
- 20202025 Chevrolet Silverado 2500 HD.
- 20202025 Chevrolet Silverado 3500 HD.
- 20202025 GMC Sierra 2500 HD.
- 20202025 GMC Sierra 3500 HD.
Verify vehicle year, model, drivetrain, bed configuration, suspension configuration, and any aftermarket equipment before ordering.
Product Contents
- Air springs.
- Vehicle-specific mounting brackets.
- Air line and inflation hardware.
- Manual inflation valves.
- Installation hardware.
Technical Specifications
- Product line: LoadLifter 5000 Pro Series.
- Maximum load-leveling capacity: Up to 7,500 lb.
- Air pressure adjustment range: 5 to 100 PSI.
- Installation location: Rear suspension.
- Operation: Adjustable pneumatic air spring support.
Instruction Information
Installation requires mounting the air springs and brackets to the rear suspension, routing air lines, and installing the inflation valves. Follow the manufacturers installation instructions and all vehicle-specific clearance requirements. Air Lift air spring systems are intended to support vehicle loads and do not increase the manufacturers original vehicle payload, axle, GVWR, or towing ratings.
Optional Accessories
An Air Lift compatible onboard air compressor system may be added separately for convenient in-cab air-pressure adjustment. An onboard compressor is optional and is not required for basic manual inflation-valve operation.